Contatti History Ferriera di Cittadella: Ferriera di Cittadella was established in the 50s as a firm specialising in hot metal rolling. Experimentation with granite cutting began at the end of the 50s. At that time, there were approximately 30 manufacturers of marble cutting blades in Italy. The product was successful due to its quality and consistent performance. Deposits were set up at Carrara, Bagni di Tivoli, Verona and Trapani. The company exported to the Middle East and mainly to Iran. This was an important period during which the company worked with the machinery manufacturers and sawmills of Carrara. The marble frames were modified, and the use of silica sand was replaced by metal grit. Granite began to be cut. The Corsi Nicolai, Biselli and Locati Lucani sawmills were among the pioneers of this experimental phase. Cutting a block into slabs took 2 months. LA SCANALATURA: In the 60s the grooved blade was developed for marble from a French patent. Ferriera di Cittadella obtained working of the patent. The mechanical and chemical characteristics of the materials were modified, and the old patent was adapted to granite cutting. The grooved blade for granite was developed. The grooved blades become an exclusive Ferriera di Cittadella product. They are the ideal tool for perfect cutting and low consumption of abrasive during polishing. They permit effective cost control in the processing of granite. Pre-tensioning – “stretching” The technique of stretching stems from the need to. The old machines began to be replaced with new ones at the Cittadella factory; automatic machines for stretching are designed. The plant now produces blades only. The factory at Riese Pio X absorbs the production of hot rolled flat bars at Cittadella and continues development and research in the sector of special steels. The first deposit is opened abroad, in Spain. The twenty-year patent protecting the previous techniques expires and they are copied by competitors all over the world but the quality is inferior and does not come up to the standards of our rolling process and technical specifications. Blades are produced to customer specifications in terms of both quality and thickness. The ability to roll thin sheets and create superior products are the characteristics that have enabled Ferriera di Cittadella to keep one step ahead of its competitors, increasing its share of a growing market. Production increases. The increase in exports is constant. The world granite cutting market depends on our product and its development in terms of quantity and quality. The market share of Ferriera di Cittadella is estimated to be over 85% of the world market. The growth in demand also leads to modernisation of the plants for special steels. The factory at Riese Pio X is expanded, updated and developed. The new cutting techniques and developments in technology have not offered valid alternatives to cutting with the traditional frame, hence the need for increasingly technical blades with hardness that adapts to the type of frame, mechanical stress and increasing speeds. Cutting a block into slabs takes 4/5 days. New granite processing markets open up. FC organises its facilities accordingly, setting up offices and factories in the various continents in order to offer the best possible service also for its most far-flung customers. Ferriera di Cittadella becomes a multinational group with offices, branches and deposits. Spain, India, Brazil and Taiwan become reference markets. The foreign markets absorb 80% of the FC production. Ferriera di Cittadella continues product development via its technical office and research and development department. The results of the new blade designs are tested at its headquarters. The company maintains ongoing contacts with sawmills. The blade that restores the cutting surface is developed: FC Plus. Despite the recession and emergence of the Asiatic countries, the company’s technique and quality enable it to maintain the lead. Plant modernisation and expansion continue with new premises for storage of materials. The production of hot rolled flat bars continues to be in demand on the market. Grooved saw blade, steel grooved saw blade, grooved saw blade for granite, granite cutting blade, hot rolling steel, hot rolling, granite cutting, granite sawing, saw blade producer, granite saw blade production, italy saw blade producer, special steel, hot rolled flat bars, hot rolled flat bar, flat bar, steel rolling production, flat bars, flat bars structural steels, flat bars weight, fc plus granite saw blade, restoring cutting surface, new cutting surface, blade efficiency, thickness saw blade, cutting efficiency, granite, granite gangsaw, iso 9000 quality system certification, iso 9001 quality system certificate, flat bars ce marking, flat steel bars, hot rolled steel bars. Steel grooved saw blade, Granite cutting blade, Grooved saw blade for granite, Hot rolling steel, Hot rolled flat bar, Flat bars - Ferriera di Cittadella SpA. Contacts form for: Steel grooved saw blade, Granite cutting blade, Grooved saw blade for granite, Hot rolling steel, Hot rolled flat bar, Flat bars - Ferriera di Cittadella SpA. FC Standard: This is the most widely used granite cutting blade in the world. The characteristics that have established this product on the market are: grooving, pre-tensioning of the blade, the chemical specifications of the raw material and the special hot rolling process. FC Plus: FC Plus is the latest new product: a practical inexpensive solution for restoring the cutting surface. The blade is provided with grooves throughout its length and on both sides. Grooved saw blade, steel grooved saw blade, grooved saw blade for granite, granite cutting blade, hot rolling steel, hot rolling, granite cutting, granite sawing, saw blade producer, granite saw blade production, italy saw blade producer, special steel, hot rolled flat bars, hot rolled flat bar, flat bar, steel rolling production, flat bars, flat bars structural steels, flat bars weight, fc plus granite saw blade, restoring cutting surface, new cutting surface, blade efficiency, thickness saw blade, cutting efficiency, granite, granite gangsaw, iso 9000 quality system certification, iso 9001 quality system certificate, flat bars ce marking, flat steel bars, hot rolled steel bars. Contacts form for: Steel grooved saw blade, Granite cutting blade, Grooved saw blade for granite, Hot rolling steel, Hot rolled flat bar, Flat bars - Ferriera di Cittadella SpA - Ferriera di Cittadella SpA. La Ferriera di Cittadella è leader mondiale nella produzione di lame da sega per graniti. Sorta nel 1956 per la laminazione a caldo dell’acciaio produce laminati mercantili e lame da sega per il taglio di marmi, pietre e graniti. Con le sue famose lame scanalate si impone in breve tempo nel mercato del granito. Attualmente la Ferriera di Cittadella è presente con una capillare rete di vendita nei cinque continenti ed esporta in più di 60 paesi. La Ferriera di Cittadella produce in due impianti di laminazione sviluppati secondo i massimi livelli di automazione ed informatizzazione. 50 anni di esperienza nel settore consentono all’azienda di conferire al prodotto la costanza di caratteristiche fisico-meccaniche elevate. Lame scanalate taglio granito, Laminati mercantili, barre laminate a caldo, Laminazione a caldo, Piatti - Ferriera di Cittadella SpA - TAG IN BREVE: lama scanalata, lama scanalata in acciaio, lama segagione granito, lama taglio granito, lama taglio del granito, lama per taglio granito, laminazione a caldo acciaio, laminazione a caldo, laminazione del ferro a caldo, laminazione a caldo ferro, taglio granito, segagione granito, produttore lame segagione, fabbricazione lame per granito, produzione lame per granito, produttore lame granito in italia, acciai speciali, laminazione acciai speciali, acciai laminati, laminato mercantile, laminati mercantili, piatto, laminazione acciaio, laminati mercantili in acciaio da costruzione, peso laminati mercantili, lama taglio granito fc plus, ripristino bordo taglio, nuovo bordo di taglio, efficienza lama, spessore lama, efficienza taglio, massa carrara taglio granito, verona taglio granito, granito, telaio granito, certificazione sistema qualita' uni en iso 9000, certificato sistema qualita' uni en iso 9001, marcatura ce laminati mercantili, barre laminate a caldo, produzione barre laminate, fabbricazione barre laminate, sagomario laminati mercantili, laminati mercantili italia, produzione barre piatte, barre acciaio, barre piatte acciaio, barre piatte d'acciaio, barre piatte in acciaio, profili d'acciaio, profili in acciaio. FC Standard: E’ la lama per taglio di granito più utilizzata nel mondo. Le caratteristiche che hanno imposto questo prodotto sul mercato sono: scanalatura, pre-tensionamento della lama, le specifiche chimiche della materia prima e la particolare laminazione a caldo. FC Plus: La novità di oggi è la fc Plus: la soluzione pratica ed economica per il ripristino della superficie di taglio. La lama presenta incisioni che la percorrono su tutta la lunghezza ed in entrambi i lati. Laminati Mercantili: Barre laminate a caldo, Laminazione a caldo, Piatti. Lame scanalate taglio granito, Laminati mercantili, barre laminate a caldo, Laminazione a caldo, Piatti - Ferriera di Cittadella SpA Azienda | Corporate Azienda | Corporate. La Ferriera di Cittadella è leader mondiale nella produzione di lame da sega per graniti.Sorta nel 1956 per la laminazione a caldo dell’acciaio produce laminati mercantili e lame da sega per il taglio di marmi, pietre e graniti. Con le sue famose lame scanalate si impone in breve tempo nel mercato del granito. Attualmente la Ferriera di Cittadella è presente con una capillare rete di vendita nei cinque continenti ed esporta in più di 60 paesi.La Ferriera di Cittadella produce in due impianti di laminazione sviluppati secondo i massimi livelli di automazione ed informatizzazione. 50 anni di esperienza nel settore consentono all’azienda di conferire al prodotto la costanza di caratteristiche fisico-meccaniche elevate.La scelta dei materiali, composizione chimica, caratteristiche meccaniche, ed i controlli sistematici di qualità vengono attuati nel rispetto del sistema qualità secondo norme UNI EN ISO 9000. Il nostro impegno è indirizzato a soddisfare le esigenze degli utilizzatori.Qualità del prodotto, servizio al cliente, strategia del management sono le chiavi del successo della Ferriera di Cittadella, leader mondiale nel settore delle lame per il taglio del granito. World leader in the production of saw blades for granite, Steel grooved saw blade, Granite cutting blade, Grooved saw blade for granite, Hot rolling steel, Hot rolled flat bar, Flat bars. Steel grooved saw blade, Granite cutting blade, Grooved saw blade for granite, Hot rolling steel, Hot rolled flat bar, Flat bars. Ferriera di Cittadella is a world leader in the production of saw blades for granite. Established in 1956 for hot rolling of steel, it produces hot rolled flat bars and saw blades for cutting marble, stone and granite. With its famous grooved blades it rapidly made a name for itself in the granite market. Currently Ferriera di Cittadella has a comprehensive sales network in all five continents and exports to over 60 countries. The company’s two steel rolling production plants are highly automated and computerised. 50 years of experience in the sector enable the company to ensure consistently high physical-mechanical product characteristics. The choice of materials, chemical composition, mechanical characteristics and the systematic quality controls are performed in compliance with the UNI EN ISO 9001:2008 certification. We are committed to meeting user needs. Product quality, customer service and management strategy are the keys to the success of Ferriera di Cittadella, a world leader in the sector of granite cutting blades. Steel grooved saw blade, Granite cutting blade, Grooved saw blade for granite, Hot rolling steel, Hot rolled flat bar, Flat bars - Ferriera di Cittadella SpA. World leader in the production of saw blades for granite, Steel grooved saw blade, Granite cutting blade, Grooved saw blade for granite, Hot rolling steel, Hot rolled flat bar, Flat bars. Storia Lame per granito - Lame scanalate - Lama taglio granito - Lama Segagione granito. Le caratteristiche che hanno imposto questo prodotto sul mercato sono: scanalatura, pre-tensionamento della lama, le specifiche chimiche della materia prima e la particolare laminazione a caldo. Lame per granito, lama scanalata / Lame scanalate, Taglio granito, Lama taglio granito, Lama segagione granito, Lame per il taglio granito, Lame per la segagione del granito, Lama scanalata per granito, Taglio granito. Filo Diamantato COBALT FREE. I fili diamantati, con Ø da 4,3 a 8,3 mm, interamente realizzati in azienda sono privi di cobalto per ridurre l’impatto ambientale e tutelare la salute. Ideale per macchine multifilo e monofilo, non richiedeno riplastificazione. Filo Diamantato COBALT FREE. FC Plus Informativa estesa sui Cookie Laminati Mercantili - Barre laminate a caldo - Laminazione a caldo. Laminato piatto in acciaio di varie qualità, incluso CORTEN e BORO. Codice Etico e MOG Privacy policy